Bazaare Mart
ECOOBD2 Car Fuel Economy Device
ECOOBD2 Car Fuel Economy Device
Couldn't load pickup availability
bPlug And Play ECOOBD2 Gasoline Car Fuel Economy ECO OBD2 Driver
It really saves gas. I have one in my car and it works better than advertised.
Product Description for Plug And Play ECOOBD2 Gasoline Car Fuel Economy ECO OBD2 Driver
Overview:
Ensure your car is OBD2-compatible if it meets one of the following criteria:
- Sold after January 1st, 1996, in the USA
- Sold after January 1st, 2001, in the European Union
- Equipped with a Benzine engine sold after January 1st, 2003
What does EcoOBD2 do?
EcoOBD2 optimizes your car's fuel consumption by creating a new map in the car's computer ECU based on your driving habits. As you accumulate more kilometers/miles, EcoOBD2 continuously updates the map to precisely match your car, resulting in increased fuel efficiency.
What is the EcoOBD2 Chip Tuning Box?
EcoOBD2 is a Chip Tuning Box that plugs into your car's OBD2 connector to reduce fuel consumption. When connected, EcoOBD2 retrieves information from the car's computer ECU. Utilizing this data, EcoOBD2 adjusts boost pressure, fuel quantity, injection timing, and pressure to enhance fuel efficiency.
EcoOBD2 Chip Tuning Box strictly adheres to manufacturer requirements, working within the engine's tolerance range. It neither harms the engine nor disrupts the car computer ECU, leaving the factory settings unaffected.
EcoOBD2 doesn't make permanent changes; to revert to the original settings, simply unplug it from the OBD2 connector.
EcoOBD2 Installation and Calibration steps:
- Turn off the ignition and remove the car key.
- Locate your car's OBD2 connector(*) and plug in EcoOBD2. (Usually under the dashboard)
- Insert the key into the ignition, turning it to the first stage without starting the car.
- Hold the reset button for approximately 5 seconds. After releasing, wait 30-54 seconds for EcoOBD2 to establish a connection with the ECU.
- Start the engine.
- After around 200 km/150 miles of driving, EcoOBD2 adapts to your vehicle and driving habits, optimizing itself for increased fuel savings.
Does your car have an OBD2 connector?
On-Board Diagnostics, or "OBD," is a computer-based system mandated for all light-duty vehicles and trucks produced after 1996 by the Clean Air Act Amendments of 1990. OBD systems monitor major engine components, including those related to emissions control.
Specifications:
Plug and Drive EcoOBD2 Economy Chip Tuning Box for Benzine, offering a 15% fuel saving. It operates based on OBD2 protocols, remapping the car's computer ECU. After a total of 200 km on the road, EcoOBD2 adapts to your car and driving habits, continually optimizing the ECU for improved fuel efficiency and reduced emissions.
Overview:
OBD2 necessarily for cars:
- Sold after January 1st, 1996 in the USA
- Sold after January 1st, 2001 in the European Union
- With Benzine engine sold after January 1st, 2003
What does EcoOBD2 make?
According to your driving habits, EcoOBD2 makes a new map in the car's computer ECU for the vehicle's lower fuel consumption. As you drive more KM/Miles the EcoOBD2 renews the map and adjusts itself to match your car perfectly for more fuel savings.
What is EcoOBD2 Chip Tuning Box?
EcoOBD2 is a Chip Tuning Box which can be plugged into OBD2 connector of your car to decrease the fuel consumption of your car. When it plugged into OBD2 connector, EcoOBD2 receives the information from the car computer ECU. With the received data from ECU, EcoOBD2 adjusts the boost pressure, quantity of fuel, injection timing and pressure to decrease the fuel consumption of your car.
EcoOBD2 Chip Tuning Box does not exceed the manufacturer requirements. It works only within the tolerance of the engine.
EcoOBD2 does not damage the engine and the car computer ECU or not cause any negative effects to the car factory setting.
EcoOBD2 does not change any of the settings permanently. To turn back to the car's original settings, just unplug EcoOBD2 from OBD2 connector.
EcoOBD2 Installation and Calibration steps:
1 - Pull the Car Key out from the ignition.
2 - Find OBD2 connector(*) in your car and Plug in EcoOBD2
3 - Insert the key into the ignition and twist the key to the first stage. (Do not start the car)
4 - Press the reset button for about 5 sec. After releasing the button, just wait for a while about 30-54 sec. (EcoOBD2 will communicate and establish connection with ECU)
5 - Start up the engine.
6 - EcoOBD2 will recognize your vehicle and your driving habits, after around 200 km/150 miles driving and thus EcoOBD2 will adjust itself to match your car perfectly for more fuel saving.
Does your car have OBD2 connector?
On-Board Diagnostics, or "OBD," is a computer-based system built into all 1996 and later light-duty vehicles and trucks, as required by the Clean Air Act Amendments of 1990. OBD systems are designed to monitor the performance of some of an engine's major components including those responsible for controlling emissions.
Specifications:
Plug and Drive EcoOBD2 Economy Chip Tuning Box for Benzine 15% Fuel Saving.
It works based OBD2 protocols as remaping the Car's computer ECU.
After driving 200 km road total, EcoOBD2 adjusts itself to the car, according to the drivers' habits and always keeps remaping the ECU to save fuel lower and immission.
Package Content:
1pc x EcoOBD2 Chip Tuning Box Interface
Share

















